Attention:The Best Way for Installation
The best installation position of the magnet is on the top of the bicycle spoke. The top of the bicycle spoke has a non-circular structure. After the magnet is locked, it will not swing back and forth, and the wireless signal is stable. The distance between the magnet and the sensor should be kept at about 6mm. If it is too close, it may become unstable. The magnet corresponds to the center position of the transmitter liked the picture showed, and the signal is more stable and accurate. Wireless launcher needs a 2032 button cell.
Specifications
Name：NEWBOLER 3 IN 1 Bike Computer Horn Light Headlight brightness: 800 lumens Lighting mode: High/Low/Flash Effective range: 200m Electronic horn: About 120 dB Sound: 5 Sounds can be switched Light working time: 5~10hrs Computer working time: 3000hrs Rechargeable Battery: 4000mAh Charging: USB charging Recharge time: 4hrs Sensor battery: CR2032 Sensor working time: 12months, 1hr/day Waterproof: IP65 Weight: about 145g Size: about 110*40* 35mm Color: Red / Blue / Green / Black
Order options:
Please note: The package you receive is the same as shown in the picture
Bike LED light
800 Lumens Bike headlight gives you awesome visibility and keep safe distance in the dark. Wired control or Button control, press button "LED" to change the model or press the turn on button on the body to change the model. There are 4 modes of brightness. (1)100% brightness for 1 Led; (2)100% brightness for 2 Led it will turn to 60% brightness if there is no movement after 3 minutes; (3)60% brightness for 2 Led; (4)2 Led flash, 2 Led closed.
Bike computer
Bike speedometer with accurate tracking on speed and distance helps you to get more fun of your cycling trip or easily achieve your fitness goals. 12 FUNCTIONS BIKE COMPUTER: top/current/average Speed, distance, lighting, LCD back light, clock, time, calorie, auto turn off/data storage, power saving etc;
Connection
Bike odometer sensor connect with magnetic by wireless, bike bell connect body by wiring . The working principle of wireless version wireless distance ≤ 55 cm/21.65 inch distance between magnet and launcher should be 3 mm or so
Bike computer inspection method
Method: Insert the computer to base. Then one hand holds launcher, one hand magnet. Approach the magnet to launcher and move it up and down. It is normal if there is speed display.(as the picture)
Memory function
When the battery is low, please charge it in time. If the battery is completely exhausted, it will cause all the data to be completely lost. The factory mode will be restored after recharging. Trip Distantance (DST) : Please long press Power button for 3 seconds to clear DST, AVS, MXS, TM and CAL value to zero. The bike light and computer will also be turn off. All data clear : Please long press "SET" and "MODE" button for 10 seconds to clear all of the data. How to reset the circumference, weight, clock : Keep Press MODE key and SET key for 5 seconds at the same time, the host enters the setting state.
Parts List
( 1 ) 3 in 1 Bike Light ( 2 ) Holder ( 3 ) Spoke Magnet ( 4 ) Installation Kit ( 5 ) Speed Sensor ( 6 ) Lighting And Sound Extension Controller ( 7 ) Extension Controller Fixed Strap ( 8 ) Cable Tie ( 9 ) USB Charging Cable
